Hermetic Oil Water Interface UTI meter
The HERMetic UTI meter is a portable gas tight liquid level gauge designed to operate on top of closed petroleum and chemical tanks.
- Moel: UBX
- Tape Length: 15m, 30m
- Connection: 2” deck valve, 1″ quick connector
- Certificate: CCS/EC
- Feature: Measure Oil,water level and temperature
Introduction
The Hermetic Oil Water Interface UTI meter is used for custody transfer, inventory control measurement and free waterdetection on shore tanks. Connected to a hermetic deck valve fixed on the tank, the HERMetic UTI meter avoids any gas releaseduring operation.
Portable Hermetic Oil Water Interface UTI meter with high quality and good price. It is procued Complies with CB\T4182 2011(Technical Requirements for Marine Oil/ Water Interface Detector) and MEPC.5 (XIII) (Technical Requirements for On/ Water Interface Detector)
The unit enables 4 measurements in one single operation:
• Ullage
• Temperature
• Oil-Water interface level
Technical Data
| Model No.: | UBX |
| Interface Detection Accuracy: | ±20mm |
| Tape Length: | 15m,30m |
| Tape Format: | Matric/British |
| Tape Resolution | 1mm |
| Tape Accuracy: | ±3mm/30m |
| Min. Detection Level | 4mm |
| Display Mode: | Audible and Visual |
| Temperature Accuracy: | ±0.5% F.S |
| Temperature Resolution: | 1 ℃ |
| Power Voltage: | DC 9V battery |
| Ambient Temperature: | -25~55℃ |
| Probe Temperature: | -25~110℃ |
| Ex. Mark: | Ex ia II BT4Ga |
| Shell Protection Class: | IP44 |
| Probe Protection Class: | IPX8 |
| Connection Standard: | JB/ZQ04078-1997 |
| Applicable Medium | Oil, water and chemical |
| Connection: | 1″quick connector on 2″Deck valve |
Use of UT Meter
Benefits:
• Closed level gauging, no vapour escape
• Continuous temperature reading.
• 100 % repeatability of measures.
• High accuracy and stability.
• Chemically resistant to corrosive liquids.
• Easy access for battery exchange.
• Sensor exchange without need of new calibration.
• No temperature drift. No degradation of the sensitivity due to sensor ageing.
• Tape cleaning devices, window wiper and tape protection on all units as standard.
• Sensor fitted with load 500 gr. for high viscous products
Low maintenance cost:
Fully modular unit. Change tape, storage tube, sensor or instrument
Application on Tankers
Portable measuring system check the tank status for effective management of the storage tank.
